Fire-Flow Metal Grinder Black 420, 60 mm, 4-Part
Breaking up herbs by hand is slow, gives uneven pieces and leaves the finest part stuck to your fingers. This Fire-Flow metal grinder in black is the 60 mm, four-part version: it grinds with a few turns and catches the fine powder in a separate tray.
How the Fire-Flow grinder is built
Four parts stack into three levels:
- Lid and grinding section: two halves with diamond-shaped teeth. A magnet holds the lid in place, so it stays shut while you turn it and lifts off without unscrewing.
- Middle chamber: ground material drops through the holes and collects on a screen. Fire-Flow states that this screen is stainless steel.
- Bottom tray: the finest powder, often called pollen, falls through the screen and builds up here over time.
Why 60 mm, and who should choose smaller
Fire-Flow makes this range in 40, 50 and 60 mm, and this is the largest. It takes more per load, and the wide lid gives your hand more leverage on dense or sticky material. The disadvantage is its size: it belongs on a table or in a drawer more than in a trouser pocket. If you mostly grind small amounts away from home, the 40 or 50 mm will suit you better.
Using and cleaning it
- Break the material into small pieces and place them between the teeth, away from the centre.
- Close the lid and turn it in both directions until it moves freely.
- Tap the side a few times before you open the middle chamber.
According to Fire-Flow, a pollen scraper is included. Use it in the bottom tray, and go gently near the screen, because fine mesh dents easily. A dry brush keeps the teeth and screen clear. For sticky residue, wipe the metal with isopropyl alcohol and let every part dry before you reassemble the grinder.
Where the design comes from
The Fire-Flow team was designing artwork for Clipper lighters before it made grinders. In a listing written by the brand, Fire-Flow explains that the grinders were launched to put its best-selling lighter designs on a second product. Fire-Flow calls the motifs on its grinders 3D designs; on this black version the motif is 420.
Specifications
- Diameter: 60 mm
- Parts: 4
- Colour: black
- Body: metal (listed as aluminium)
- Teeth: diamond-shaped
- Screen: stainless steel, according to Fire-Flow
- Closure: magnetic lid
Express Highs ships in plain, discreet packaging.
| Product Details | |
| Colour | Black |
| Diameter | 60 mm |
| Material | Metal |
| Number of Parts | 4-Part |
| Product Type | Grinder |
| Size | Large |
Fire-Flow Metal Grinder Black 420, 60 mm, 4-Part
- Brand: Fire-Flow
- Product Code: 2015050
- Availability: In Stock
-
19.90€
Tags: Fire-Flow grinder, 4-part grinder, 60 mm grinder, metal grinder, grinder with pollen screen, magnetic grinder, black grinder
Headshop best sellers
What other customers are buying right now






