McSmoke Acrylic Grinder 3-Part, Clear, 66 mm
Do you need a grinder for the festival bag, the spare drawer or a friend's house? The McSmoke acrylic grinder is a simple three-part model in clear plastic, 66 mm across.
What you get
It is a round grinder made of transparent acrylic, in three parts. Two of them carry the teeth and turn against each other. On acrylic grinders of this kind the third part normally closes a small storage space. Because the body is see-through, you can check how fine the material is without opening it.
- Diameter: 66 mm
- Material: clear acrylic (plastic)
- Construction: 3 parts
Similar acrylic grinders in other shops are mostly listed at 60 mm, so this one is at the wide end. That gives more room per load, but it is less easy to carry in a trouser pocket.
How to use the McSmoke acrylic grinder
- Break dried herbs into small pieces and spread them between the teeth.
- Close the grinder and turn the two toothed halves back and forth a few times.
- Open it and tap the ground material out.
Several small loads work better than one full load. One metal grinder maker says in its comparison that acrylic teeth clog easily with sticky material, so let damp herbs dry a little first and do not force the halves.
Acrylic or metal
Low weight and low cost are the reasons to pick acrylic. A Dutch headshop guide describes plastic grinders as a sensible spare or a choice for occasional use. The criticism that comparison guides share is the teeth: moulded plastic loses its edge sooner than machined aluminium. One guide estimates one to two years of life for an acrylic grinder, against five years or more for metal. Another warns about small plastic shavings ending up in the ground material once the teeth are worn. Replace the grinder when the teeth look rounded or chipped.
If you grind every day, a metal grinder will serve you longer. For occasional use, travel or as a backup, this one is enough.
Cleaning
Brush the teeth out with a small dry brush after use. For a full clean, wash the parts in lukewarm water with a little dish soap and let them dry completely. Avoid very hot water and strong solvents, which can cloud or crack acrylic.
Express Highs ships in plain, discreet packaging.
| Product Details | |
| Colour | Clear |
| Diameter | 66 mm |
| Material | Acrylic |
| Number of Parts | 3-Part |
| Product Type | Grinder |
| Size | Large |
McSmoke Acrylic Grinder 3-Part, Clear, 66 mm
- Brand: Headshop
- Product Code: 2016114
- Availability: In Stock
-
1.20€
Tags: McSmoke grinder, acrylic grinder, plastic grinder, 3-part grinder, clear grinder, 66 mm grinder, herb grinder
Headshop best sellers
What other customers are buying right now








