SLX Non-Stick Grinder 4-Part 50 mm, Purple Haze
Most metal grinders turn stiff after a few weeks, once resin collects on the teeth and in the threads. The SLX grinder was designed around one answer to that: a ceramic non-stick coating on every surface, inside and out. This is the 50 mm, 4-part version in Purple Haze.
What is different about the SLX grinder
The body is aluminium. Retailers specify 7075 alloy, which SLX says is stronger than the 6-series aluminium used for most grinders. According to SLX, the ceramic layer on top contains no Teflon or PTFE.
Two details matter in daily use:
- There is only one set of threads. The lid closes with a magnet and the pollen screen lifts out without unscrewing, so resin has fewer places to jam.
- Several retailers count 27 trapezoid-shaped teeth on this size, with drop-through holes that let ground herb fall into the chamber below.
What owners report
One forum reviewer expected the coating to be a sales trick, then found the grinder still mostly clean after about 14 g (half an ounce) of very sticky herb. Buyers on European shop pages mostly confirm that little sticks to it.
The criticism is worth knowing too:
- The same reviewer rated the lid magnet as the weak point: a sharp jolt upside down can open it.
- Some buyers find the grind too coarse for their taste because the holes are large.
- A few buyers say theirs still became sticky, and one reports coating damage on two grinders.
SLX says its grinders do not need cleaning. In practice, expect far less cleaning, not none. And at 50 mm this is a pocket size, small for grinding large amounts at once.
Looking after the coating
SLX's care advice is short. Tap the grinder out over paper after use and brush the teeth now and then. SLX says buildup mostly appears with herb above 12% moisture. Rubbing alcohol or acetone will not harm the coating, though they can fade the logo. Never scrape with a metal tool: a scratch in the coating makes the grinder work worse. Use the scraper from the box or a soft brush.
Specifications
- Diameter: 50 mm
- Height: 33 to 35 mm, depending on the source
- Weight: about 100 g
- Parts: magnetic lid, grinding section, lift-out pollen screen, collection base
- Material: aluminium with ceramic coating
- Colour: Purple Haze
- Included: scraper
Express Highs ships in plain, discreet packaging.
| Product Details | |
| Colour | Purple |
| Diameter | 50 mm |
| Material | Aluminium |
| Number of Parts | 4-Part |
| Product Type | Grinder |
| Size | Medium |
SLX Non-Stick Grinder 4-Part 50 mm, Purple Haze
- Brand: SLX
- Product Code: 2900085
- Availability: In Stock
-
51.95€
Tags: SLX grinder, non-stick grinder, ceramic coated grinder, 4-part grinder, 50 mm grinder, aluminium grinder, purple grinder, pollen grinder
Headshop best sellers
What other customers are buying right now







