SLX Non-Stick Grinder 4-Part 50 mm, Yellow Gold
Most metal grinders turn smoothly for a few weeks, and then resin collects on the threads and the lid starts to stick. The SLX grinder is designed around that one problem: every surface has a ceramic non-stick coating. This is the four-part, 50 mm version in Yellow Gold.
How an SLX grinder is built
The body is aluminium, and retailers specify the 7075 alloy. The ceramic layer covers the inside and the outside. The manufacturer states that it contains no Teflon or PTFE.
The grinder has only one set of threads. The screen is a loose insert that lifts out, so you can use all four parts or leave the screen out and use three. The lid closes with a magnet.
Teeth and grind
The current 50 mm SLX model is listed with 27 trapezoid-shaped teeth, each with four cutting edges. Ground herbs drop through the holes into the chamber below. One reviewer found that turning the grinder upside down while grinding gives a much finer result, because nothing can fall through until you turn it upright again. One buyer found the normal grind a little coarse because the holes are large.
What owners say after using it
- A reviewer who used one daily for a month saw very little build-up and no change in how smoothly it turned. Damp, fresh material did leave some residue.
- Some shops advertise it as never needing cleaning. Reviewers are more careful: one says it still needs cleaning now and then.
- A forum reviewer found the lid magnet weaker than on some competing grinders.
- One buyer reports that the lift-out insert sits loosely and falls out easily.
- The most frequent criticism is that it costs more than a basic grinder.
Care and size
One retailer advises against filling the grinding chamber to the top and warns never to clean the grinder with a metal tool. A soft brush is the safer choice for a coated surface. To loosen material that stays behind, tap the grinder lightly on a firm surface.
At 50 mm this is the small, pocket size in the SLX range. If you usually grind larger amounts at one time, the 62 mm model will suit you better.
Specifications
- Diameter: 50 mm (2 inches)
- Parts: 4, with a removable screen
- Material: aluminium with a ceramic non-stick coating
- Colour: Yellow Gold
Express Highs ships in plain, discreet packaging.
| Product Details | |
| Colour | Gold |
| Diameter | 50 mm |
| Material | Aluminium |
| Number of Parts | 4-Part |
| Product Type | Grinder |
| Size | Medium |
SLX Non-Stick Grinder 4-Part 50 mm, Yellow Gold
- Brand: SLX
- Product Code: 2900099
- Availability: In Stock
-
54.95€
Tags: SLX grinder, non-stick grinder, ceramic coated grinder, 4-part grinder, 50 mm grinder, aluminium grinder, gold grinder
Headshop best sellers
What other customers are buying right now







