Small Snuff Kit, 5 Parts
6.95€
Breaking up herbs with your fingers is slow, leaves resin on your hands and gives you pieces of very different sizes. A grinder does the same job in a few turns. This yellow Bowl Grinder is a 3-part grinder with metal grinding pins and a separate compartment under the grinding chamber.
The lid and the section below it form the grinding chamber. The pins inside are metal, and when you turn the lid they cut the herb into small, even pieces. The third part is a catch compartment at the bottom, which also works as a small stash space.
That third part is the difference from a 2-part grinder, where everything stays between the pins and has to be picked out. A 4-part grinder adds a second lower chamber, reserved for fine pollen. If a separate pollen chamber matters to you, this is not the right type.
Do not overfill it. Two half loads grind faster and more evenly than one load pressed in tight.
Resin builds up on the pins and along the rim, and after a while the lid becomes stiff. Brush the pins clean every few uses with a small stiff brush or a toothpick. For stubborn residue, put the empty grinder in the freezer for 20 minutes: cold resin turns brittle and comes off more easily. If you want to use isopropyl alcohol, try it on a small spot first, because alcohol can dull some coloured finishes. Grinding only dry material prevents most of the stickiness.
Express Highs ships in plain, discreet packaging.
| Product Details | |
| Colour | Yellow |
| Number of Parts | 2-Part |
| Product Type | Grinder |
Tags: yellow grinder, 3-part grinder, bowl grinder, herb grinder, grinder with stash compartment, grinder with metal pins
What other customers are buying right now